Dell G5 15 - Removing the Display Assembly; Prerequisites; Procedure

Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the wireless card.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
Procedure
1 Peel o the tapes that secure the display hinges to the palm-rest assembly.
2 Remove the two screws (M2.5x5) that secure the display hinges to the palm-rest assembly.
3 Open the display hinges at an angle of 90 degrees.
4 Lift the palm-rest assembly o the display assembly.
37
66 Removing the display assembly