Removing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the base cover.
Procedure
1 Remove the three screws (M2.5x6) that secure the battery to the computer base.
2 Lift the battery at an angle o the computer base.
3 Turn the computer over, open the display, and press and hold the power button for ve seconds to ground the system board.
5
Removing the battery 17
To Next Page
Loading...
