Replacing the display hinges
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the screw holes on the display hinges with the screw holes on the display back-cover.
2 Replace the eight screws (M2.5x2.5) that secure the display hinges to the display back-cover.
3 Adhere the tape that secures the display hinge to the display back-cover.
46
82 Replacing the display hinges
To Next Page
Loading...
