Replacing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Route the camera cable through the routing guides on the display back-cover and antenna assembly.
2 Adhere the tape that secures the camera cable to the display back-cover and antenna assembly.
Post-requisites
1 Replace the camera.
2 Replace the display cable.
3 Replace the display panel.
4 Replace the display hinges.
5 Replace the display bezel.
6 Replace the display assembly.
7 Follow the procedure from step 7 to step 23 in Replacing the computer base.
8 Replace the rear cover.
9 Replace the wireless card.
54
Replacing the display back-cover and antenna assembly 95
To Next Page
Loading...
