Removing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the solid-state drive.
5 Remove the memory modules.
6 Remove the wireless card.
7 Remove the computer base.
8 Follow the procedure from step 1 to step 14 in Removing the system board.
Procedure
Lift the power-adapter port, along with its cable, o the computer base.
27
Removing the power-adapter port 53
To Next Page
Loading...
