Replacing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the battery in the slot on the computer base and align the screw holes on the battery with the screw holes on the computer
base.
2 Replace the three screws (M2.5x6) that secure the battery to the computer base.
Post-requisites
Replace the base cover.
6
18 Replacing the battery
To Next Page
Loading...
