Replacing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the display cable on the display back-cover and antenna assembly.
2 Route the display cable through the routing guides on the display back-cover and antenna assembly.
3 Adhere the tape that secures the display cable to the display back-cover and antenna assembly.
50
Replacing the display cable 89
To Next Page
Loading...
