Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Topics:
• Procedure
• Post-requisites
Procedure
1 Adhere the solid-state drive shield to the solid-state drive.
2 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot.
3 Replace the screw (M3x3) that secures the solid-state drive to the computer base.
Post-requisites
Replace the base cover.
10
Replacing the solid-state drive 23
To Next Page
Loading...
