Dell G5 15 - Removing the Fingerprint-Reader Board; Prerequisites; Procedure

Removing the ngerprint-reader board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Follow the procedure from step 1 to step 17 in Removing the computer base.
5 Remove the power-button board.
Procedure
1 Remove the two screws (M2x2) that secure the ngerprint-reader board bracket to the palm-rest assembly.
2 Lift the ngerprint-reader board bracket o the palm-rest assembly.
3 Lift the ngerprint-reader board o the palm-rest assembly.
33
62 Removing the ngerprint-reader board