Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the power-adapter port into the slot on the computer base.
Post-requisites
1 Follow the procedure from step 4 to 16 in Replacing the system board.
2 Replace the computer base.
3 Replace the wireless card.
4 Replace the memory modules.
5 Replace the solid-state drive.
6 Replace the rear cover.
7 Replace the battery.
8 Replace the base cover.
28
54 Replacing the power-adapter port