Dell G5 5590 - 39 Replacing the Power Button with Fingerprint Reader; Procedure

Identifier GUID-0C3EE813-46D4-4A46-9435-5A8AE8783F68
Status Released
Replacing the power button with ngerprint
reader
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with ngerprint reader.
Identifier GUID-57B3999E-143D-4583-B31B-118F75EAAA67
Status Released
Procedure
1 Using the alignment posts, align the power button on the palm-rest assembly.
2 Replace the two screws (M2x2.5) that secure the power button to the palm-rest assembly.
3 Adhere the ngerprint reader cable on the palm-rest assembly.
39
Replacing the power button with ngerprint reader 101