Identifier GUID-CC648B28-FBF9-4A6F-BB11-4C6C2FA3D08A
Status Released
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE: Screw color may vary with the conguration ordered.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm-rest assembly M2x4 7
Battery (4-cell) Palm-rest assembly M2x4 4
Battery (6-cell) Palm-rest assembly M2x4 6
Fan (for graphics card) Palm-rest assembly M2x2.5 3
Fan (for processor) Palm-rest assembly M2x2.5 3
Hard-drive assembly Palm-rest assembly M2x4 3
Hard-drive bracket Hard drive M3x3 4
Display hinges Palm-rest assembly M2x4 4
Display hinges Palm-rest assembly M2x4 8
I/O board Palm-rest assembly M2x2.5 2
Keyboard bracket Palm-rest assembly M1.2x2 19
Keyboard bracket Palm-rest assembly M2x3 21
5
14 Screw list
To Next Page
Loading...
