Identifier GUID-DB825F91-AB3C-47B9-A43E-A9B2B38F0AFD
Status Released
Removing the palm rest
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-D2AE36E6-39C9-47D4-8637-D7F33B5D8939
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the memory modules.
4 Remove the speakers.
5 Remove the solid-state drive/Intel Optane memory module.
6 Remove the wireless card.
7 Remove the graphics-card fan.
8 Remove the processor fan.
9 Remove the heat sink.
10 Remove the coin-cell battery.
11 Remove the touchpad.
12 Remove the hard drive (optional).
13 Remove the power-adapter port.
14 Remove the I/O board.
15 Remove the display assembly.
16 Remove the system board.
17 Remove the power button with ngerprint reader.
18 Remove the keyboard.
Identifier GUID-77121180-6393-4E9A-8CF6-747762C4E2B9
Status Released
Procedure
After performing the above steps, we are left with the palm rest.
42
Removing the palm rest 107
To Next Page
Loading...
