Identifier GUID-E15EE482-44FD-4E71-91FC-899D4B61532E
Status Released
Replacing the battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-38435773-7AD9-4552-AC2F-65FDCB8C7733
Status Released
Procedure for replacing the battery for computers
shipped without hard drive
1 Align the screw holes on the battery with the screw holes on the palm-rest assembly.
2 Replace the six screws (M2x4) that secure the battery to the palm-rest assembly.
3 Connect the battery cable to the system board.
9
26 Replacing the battery