Identifier GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Status Released
Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-CDDC0F0A-0513-44D3-BC86-19077519F7A7
Status Released
Procedure
1 Place the power-adapter port into the slot, and adhere the power-adapter port on the palm-rest assembly.
2 Connect the power-adapter port cable to the system board.
3 Align the screw hole on the power-adapter bracket with the screw hole on the palm-rest assembly.
4 Replace the screw (M2x4) that secures the power-adapter port bracket to the palm-rest assembly.
31
78 Replacing the power-adapter port
To Next Page
Loading...
