Dell G5 5590 - 24 Removing the Graphics-Card Fan; Prerequisites; Procedure

Identifier GUID-5B7F3C75-6B42-44E0-A9FB-A46EBE4BBA72
Status Released
Removing the graphics-card fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-5BAAC44D-C63C-4E84-8264-5FBA1D4F995B
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-4C83A8D3-7E02-4269-8809-473A42F2B926
Status Released
Procedure
1 Remove the three screws (M2x2.5) that secure the fan to the system board.
2 Lift the fan at an angle.
3 Disconnect the fan cable from the system board.
4 Lift the fan o the system board.
24
64 Removing the graphics-card fan