Identifier GUID-E7A6C062-FC14-41CC-8C31-9E1A32C1A419
Status Released
Replacing the graphics-card fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-B388376E-5C8B-48CA-B2C3-D82146DAED50
Status Released
Procedure
1 Slide the fan into the slots at an angle, on the system board.
2 Connect the fan cable to the system board.
3 Replace the three screws (M2x2.5) that secure the fan to the system board.
25
66 Replacing the graphics-card fan
To Next Page
Loading...
