Identifier GUID-BDA8C411-B93C-49C1-83D3-F84F4807E3F8
Status Released
Procedure for removing the battery for computers
shipped without hard drive
1 Using the pull tab, disconnect the battery cable from the system board, if applicable.
2 Remove the six screws (M2x4) that secure the battery to the palm-rest assembly.
3 Lift the battery, along with its cable, o the palm-rest assembly.
Identifier TASK_804CAEC8D09E4D7B847FA81D6FB93533
Status
Procedure for removing the battery for computers shipped
with hard drive
1 Using the pull tab, disconnect the battery cable from the system board, if applicable.
2 Remove the four screws (M2x4) that secure the battery to the palm-rest assembly.
3 Lift the battery, along with its cable, o the palm-rest assembly.
24
Removing the battery