Identifier GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Status Released
Replacing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-8F896A17-EA23-4291-A9CC-7B8149350792
Status Released
Procedure
1 Route the display cable into the slot on the palm-rest assembly.
2 Route the antenna cables into the slot on the palm-rest assembly.
3 Align the tabs on the hinges with the slots on the palm-rest assembly and place the display assembly on the palm-rest assembly.
4 Replace the eight screws (M2x4) that secure the left and right hinges to the palm-rest assembly.
35
88 Replacing the display assembly
To Next Page
Loading...
