Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-7116CE4A-7EE1-451D-B81E-30D3CBA156ED
Status Released
Prerequisites
1 Remove the base cover.
2 Replace the wireless card.
3 Remove the graphics-card fan.
4 Remove the processor fan.
5 Remove the heat sink.
Identifier GUID-783FD814-E78D-45ED-AACD-DC5A889DFAF3
Status Released
Procedure
1 Remove the four screws (M2x4) that secure the display assembly to the palm-rest assembly.
2 Peel the tape that secures the display cable to the system board.
3 Open the latch and disconnect the display cable from the system board.
4 Remove the screw (M2x4) that secures the display to the system board.
5 Remove the display cable from the system board.
34
84 Removing the display assembly
To Next Page
Loading...
