Identifier GUID-98F27B1C-9F09-48EC-83D7-FC85C825E6A4
Status Released
Replacing the I/O board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-22AE2693-99D2-4338-9E7E-A02DE5C08866
Status Released
Procedure
1 Align the ports on the I/O board with the slots on the palm-rest assembly.
2 Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
3 Replace the two screws (M2x2.5) that secure the I/O board to the palm-rest assembly.
33
82 Replacing the I/O board
To Next Page
Loading...
