7 Lift the USB Type-C port bracket o the system board.
8 Disconnect the speaker cable from the system board.
9 Open the latch and disconnect the keyboard cable from the system board.
10 Open the latch and disconnect the keyboard back-light cable from the system board.
11 Open the latch and disconnect the touchpad cable from the system board.
12 Open the latch and disconnect the hard-drive cable from the system board (optional).
13 Open the latch and disconnect the ngerprint-reader cable from the system board.
14 Disconnect the coin-cell battery cable.
15 Open the latch and disconnect the I/O-board cable from the system board.
16 Remove the seven screws (M2x2.5) that secure the system board to palm-rest assembly.
17 Lift the system board o the palm-rest assembly.
Removing the system board
93
To Next Page
Loading...
