12. Hard drive data cable connector (SATA 1)
13. Hard drive data cable connector (SATA 0, boot drive)
14. M.2 2230/2280 solid state drive slot
15. PCIe x1 slot (SLOT 2)
16. PCIe x16 slot (SLOT 3)
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
Figure 47. Installing the system board
Steps
1. Slide the front I/O-ports on the system board into the front I/O-slots on the chassis.
2. Align the screw holes on the system board with the screw holes on the chassis.
Removing and installing Field Replaceable Units (FRUs)
75
To Next Page
Loading...
