Removing the 2280 solid-state drive from M.2 slot two
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
NOTE: If you have ordered a 3-cell (40 Wh) battery configuration, your computer will not have a solid-state drive installed
in M.2 slot two.
NOTE: If you have ordered a 4-cell (53 Wh) battery configuration, your computer may have a 2230 solid-state drive or a
2280 solid-state drive installed in M.2 slot two.
NOTE: This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot two.
The following image indicates the location of the 2280 solid-state drive that is installed in M.2 slot two and provides a visual
representation of the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the solid-state drive thermal shield to the palm-rest and keyboard assembly.
Removing and installing components
29
To Next Page
Loading...
