Steps
1. Align the notch on the 2280 solid-state drive with the tab on M.2 slot two on the system board.
2. Slide the 2280 solid-state drive into M.2 slot two on the system board.
3. Replace the screw (M2x3) that secures the 2280 solid-state drive to the palm-rest and keyboard assembly.
4. Place the solid-state drive thermal shield on the 2280 solid-state drive.
5. Align the screw hole on the solid-state drive thermal shield with the screw hole on the palm-rest and keyboard assembly.
6. Replace the screw (M2x3) that secures the solid-state drive thermal shield to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Installing the solid-state drive mounting bracket on M.2 slot two
About this task
The figure provides a visual representation of the procedure to move the solid-state drive mounting bracket on M.2 slot two.
Removing and installing components
31
To Next Page
Loading...
