NOTE: If there is only one solid-state drive in the configuration you ordered, you may install another solid-state drive in the
other M.2 slot. However, you need a solid-state drive bracket (sold separately) to install the additional solid-state drive.
Steps
1. Remove the screw (M1.6x2.5) that secures the solid-state drive mounting bracket to the 2230/2280 bracket slot on the
palm-rest and keyboard assembly.
2. Lift the solid-state drive mounting bracket from the 2230/2280 bracket slot on the palm-rest and keyboard assembly.
3. Place the solid-state drive mounting bracket into the 2280/2230 bracket slot on the palm-rest and keyboard assembly.
4. Replace the screw (M1.6x2.5) that secures the solid-state drive mounting bracket to 2230/2280 bracket slot on the
palm-rest and keyboard assembly.
5. Install the 2230 solid-state drive or 2280 solid-state drive, whichever applicable.
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
32
Removing and installing components
To Next Page
Loading...
