Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
2. Align the notch on the wireless card with the tab on the wireless-card slot on the system board.
3. Slide and insert the wireless card into the wireless-card slot on the system board.
4. Place the wireless-card bracket on the wireless card.
5. Align the screw hole on the wireless-card bracket and the screw hole on the system board.
6. Replace the screw (M2x3) that secures the wireless-card bracket and wireless card to the system board.
7. Adhere the tape that secures the antenna cables to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
34
Removing and installing components
To Next Page
Loading...
