Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe: Recommended for field technicians.
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
Screw List
The following table shows the screw list and the image of the screws.
Table 1. Screw list
Component Screw type Quantity Image
3-cell battery M2x3 4
Dummy battery cell M2x3 2
4-cell battery M2x3 5
Audio board cable M2x3 2
Heatsink assembly M2x3 4
World-facing camera M2.5x2.5 1
Power-adapter port M2x4 2
WLAN bracket M2x3 1
2
10 Removing and installing components
To Next Page
Loading...
