Table 9. POST behavior (continued)
Option Description
ā Continue on warnings (disabled by default)
ā Continue on warnings and errors (disabled by default)
NOTE: The errors deemed critical to the operation of the
system hardware will always halt the system.
Virtualization support
Table 10. Virtualization support
Option Description
Virtualization This field specifies whether a Virtual Machine Monitor (VMM)
can utilize the conditional hardware capabilities provided by
Intel Virtualization Technology.
NOTE: Trusted Execution requires Virtualization
Technology to be enabled.
The Enable Intel Virtualization Technology option is
enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from
utilizing the additional hardware capabilities provided by Intel
Virtualization technology for direct I/O.
NOTE: Trusted Execution requires VT for Direct I/O to be
enabled.
The Enable VT for Direct I/O option is enabled by default.
Wireless
Table 11. Wireless
Option Description
Wireless Device Enable Allows you to enable or disable the internal wireless devices.
ā WLAN
ā Bluetooth
All the options are enabled by default.
Maintenance
Table 12. Maintenance
Option Description
Service Tag Displays the Service Tag of your computer. If, for some
reason, the service tag was not already set, you would be able
to use this field to set it.
Asset Tag Allows you to create a system asset tag if an asset tag is not
already set, it is limited to 64 characters. This option is not set
by default.
BIOS Downgrade This controls flashing of the system firmware to previous
revisions. The Allow BIOS downgrade option is enabled by
default.
76 System setup
To Next Page
Loading...
