3. Remove the display assembly.
4. Remove the display bezel.
5. Remove the display panel.
About this task
The following image indicates the location of the front-facing camera, and provides a visual representation of the removal
procedure.
Steps
1. Peel off the adhesive tape that secures the display connector to the front-facing camera module.
2. Disconnect the display cable from the front-facing camera module.
3. Use a plastic scribe to pry the front-facing camera module from the display cover.
4. Lift and remove the front-facing camera module from the display cover.
Installing the front facing camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the front-facing camera, and provides a visual representation of the installation
procedure.
Removing and installing components
57