Steps
1.
NOTE:
Push the screwdriver directly into the stickers and turn counterclockwise to replace the screws. When replacing
the new display bezel, adhere the new stickers over the screws once the screws have been secured.
Align the display bezel with the display assembly. Gently snap the display bezel into place.
2. Replace the four screws (M2.5x3.8) to secure the display bezel on the display assembly.
Next steps
1. Install the display assembly.
2. Install the palmrest and keyboard assembly.
3. Follow the procedure in after working inside your computer.
Display panel
Removing the display panel
Prerequisites
NOTE: The following steps are for Latitude 3120 systems.
1. Follow the procedure in before working inside your computer.
2. Remove the palmrest and keyboard assembly.
3. Remove the display assembly.
52
Removing and installing components
To Next Page
Loading...
