Next steps
1. Install the system board.
2. For systems that are shipped with a 3-cell battery, install the dummy battery cell.
3. Install the heatsink assembly.
4. For systems shipped with a world-facing camera, install the world-facing camera.
5. Install the power adapter port.
6. Install the display assembly.
7. Install the 3-cell battery or the4-cell battery depending on the system configuration.
8. Install the audio board.
9. Install the speakers.
10. For systems that are shipped with a Solid State Drive (SSD), install the solid-state drive.
11. Install the palmrest and keyboard assembly.
12. Follow the procedure in after working inside your computer.
Removing and installing components
65
To Next Page
Loading...
