Removing and installing components
Topics:
• Recommended tools
• Screw size list
• Subscriber Identity Module(SIM) board
• Base cover
• Battery
• Solid state drive
• Hard drive
• Coin cell battery
• Heat sink assembly
• WLAN card
• WWAN card – optional
• Memory modules
• Keyboard
• Power connector port
• Chassis frame
• SmartCard module
• Speaker
• System board
• Display assembly
• Display bezel
• Display hinge cover
• Display hinges
• Display panel
• Camera
• Display (eDP) cable
• Display back cover assembly
• Palm rest
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE
: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
2
6 Removing and installing components
To Next Page
Loading...
