Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in after working inside your computer.
Display panel
Removing the display panel
Prerequisites
NOTE: The display panel removal procedure is applicable only for Latitude 5320 laptop and not for the 2-in-1 configuration.
NOTE: The display panel (touch and nontouch) and its support brackets are defined as a single assembly and cannot be
further disassembled once it is removed from the display back cover. The support brackets are not to be removed from the
display panel.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display hinges.
60
Removing and installing components
To Next Page
Loading...
