3. Install the base cover.
4. Follow the procedure in after working inside your computer.
Display back cover assembly
Removing the display back-cover
Prerequisites
NOTE: The display back-cover removal procedure is applicable only for Latitude 5320 laptop and not for the 2-in-1
configuration.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display hinges.
7. Remove the display panel.
8. Remove the camera.
9. Remove the eDP cable.
About this task
The following images indicate the location of the display back-cover and provide a visual representation of the removal
procedure.
Steps
After performing the preceding steps, you are left with the display back cover.
68
Removing and installing components
To Next Page
Loading...
