12. Install the base cover.
13. Follow the procedure in after working inside your computer.
SIM card slot filler
Removing the SIM card slot filler
Prerequisites
Follow the procedure in before working inside your computer.
About this task
NOTE: For models shipped with WLAN antennas only, the SIM card slot filler is a separate service part and is not included
with replacement palm rest, as a result the SIM card slot filler must be removed and then re-installed when replacing the
palm rest.
The following image provides a visual representation of the SIM card slot filler removal procedure.
Steps
1. Pull the SIM card slot filler from the top side of the palm rest.
2. Lift the SIM card slot filler out of the system.
Installing the SIM card slot filler
Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
The following image provides a visual representation of the SIM card slot filler installation procedure.
Removing and installing components
87
To Next Page
Loading...
