Table 4. Integrated device options (continued)
Option Description
Disable USB4 PCIE Tunneling
By default the Disable USB4 PCIE Tunneling is disabled.
Video/Power only on Type-C Ports
This feature limits Type-C port functionality to video or power
only.
Video/Power only on Type-C Ports - This option is disabled by
default.
NOTE: Enabling the Enable Thunderbolt Adapter Boot
Support or Enable Thunderbolt Adapter Pre-Boot
Modules option may allow devices that are connected
to Thunderbolt adapter during preboot to function in the
operating system regardless of the security level selected in
BIOS setup. The device continues to operate in the operating
system until it is disconnected. When connected while within
the operating system, the device connects according to the
security level and previous operating system authorizations.
Type-C Dock Override
This feature allows the users to use connected Type-C Dell Dock
to provide data stream when keeping the external USB ports
disabled port functionality to video or power only.
Type-C Dock Override - This option is enabled by default.
The submenu is:
Video Allows users to use video on Dell Dock
external ports.
Audio Allows users to use audio on Dell Dock
external ports.
LAN Allows users to use LAN on Dell Dock
external ports.
Audio and LAN - These options are enabled by default.
Miscellaneous Drives
Enable Fingerprint Reader Device - Allows you to enable or
disable the fingerprint reader device. This option is enabled by
default.
Unobstrusive Mode Enable Unobstrusive Mode - - Allows you to turn off the
system light and sound. This option is set to Off by default.
Storage
Table 5. Storage options
Option Description
SATA/NVMe Operation
Allows you to set the operating mode of the integrated storage
device controller.
The options are:
● Disabled
● AHCI/NVMe
● RAID On— By default, the RAID On option is enabled.
Storage Interface
Port Enablement - Allows you to select onboard drives.
The options are:
96 System setup
To Next Page
Loading...
