Table 2. Overview
Option Description
○ Intel Hyper-Threading Capable
○ 64-Bit Technology
● Memory Configuration
○ Memory Installed
○ Memory Available
○ Memory Speed
○ Memory Channel Mode
○ Memory Technology
● Device Information
○ Panel Type
○ Privacy Screen
○ Video Controller
○ Video Memory
○ Wi-Fi Device
○ Native Resolution
○ Video BIOS Version
○ Audio Controller
○ Bluetooth Device
○ Pass Through MAC Address
○ Cellular Device
Boot configuration
Table 3. Boot configuration
Option Description
Boot Sequence
Allows you to set the order in which the BIOS searches
devices to find an operating system to boot.
The options are:
● Windows Boot Manager
● UEFI RST
NOTE: Legacy Boot mode is not supported on this
platform.
Secure Digital (SD) Card Boot
Allows you to enable or disable Enable Secure Digital (SD)
Card Boot.
Secure Boot
Secure Boot helps ensure your system boots using only
validated boot software.
Enable Secure Boot—By default, this option is disabled.
NOTE: The system has to be in UEFI boot mode to enable
Enable Secure Boot.
Secure Boot Mode
Changes to the Secure Boot operation mode modifies the
behavior of Secure Boot to allow evaluation of UEFI driver
signatures.
The options are:
● Deployed Mode—By default, this option is enabled.
● Audit Mode
Expert Key Management
Allows you to enable or disable Expert Key Management.
94 System setup
To Next Page
Loading...
