Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve the
thermal bond between the system board and heat sink.
1. Install the system board.
2. Install the display assembly.
3. Install the power button with fingerprint reader (optional).
4. Install the heat sink.
5. Install the speakers.
6. Install the smart card reader (optional).
7. Install the fan.
8. Install the M.2 2280 SSD card or M.2 2230 SSD card.
9. Install the WWAN card (optional).
10. Install the SIM card slot filler (for non-WWAN configuration).
11. Install the WLAN card.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in after working inside your computer.
90
Removing and installing components
To Next Page
Loading...
