Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
• Base cover
• Battery
• Coin cell
• Memory
• Solid state drive
• WLAN card
• WWAN card
• Heatsink
• Power adapter port
• Speakers
• LED board
• Touchpad button board
• Smart card reader
• Display assembly
• Hinge caps
• Display hinges
• Display Bezel
• Display Panel
• Camera—microphone module
• Display Cable
• System board
• Power-Button Board
• Keyboard
• Palmrest
Base cover
Removing the base cover
Follow the procedure in before working inside your computer.
1. Loosen the eight captive screws that secure the base cover to the computer.
4
Removing and installing components 17
To Next Page
Loading...
