1. Install the display bezel.
2. Install the hinges.
3. Install the hinge cap
4. Install the display assembly
5. Install the battery.
6. Install the base cover.
7. Follow the procedure after working inside your computer.
Camera—microphone module
Removing the camera—microphone module
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the hinge cap.
6. Remove the hinges.
7. Remove the display bezel.
8. Remove the display panel.
1. Disconnect the display cable connection from the camera-microphone module [1].
2. Use a plastic scribe to pry the camera-microphone module from the display back cover [2].
Installing the camera—microphone module
1. Align and place the camera-microphone module in the display back cover assembly [1].
2. Connect the display cable to the camera-microphone module [2].
66
Removing and installing components
To Next Page
Loading...
