Installing the display bezel
Place the display bezel on the display assembly and press along the edges to click lock it to the display back cover.
1. Install the hinges.
2. Install the hinge cap
3. Install the display assembly
4. Install the battery.
5. Install the base cover.
6. Follow the procedure after working inside your computer.
Display Panel
Removing the display panel
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the display assembly.
5. Remove the hinge cap.
6. Remove the hinges.
7. Remove the display bezel.
1. Remove the four (M2x2.5) screws [1] and flip over display panel [2] to separate the LCD panel from the back cover.
62
Removing and installing components
To Next Page
Loading...
