Steps
1. Align and place the system chassis under the hinges of the display assembly.
2. Fold back the left and right hinges.
3. Install the four (M2.5x3) screws to secure the display hinges to the palm-rest and keyboard assembly.
4. Route the display and camera cable thought the routing guide on the palm-rest and keyboard assembly.
5. Connect the display cable to the system board.
6. Connect and adhere the camera cable to the system board.
7. Place the display-cable bracket over the display-cable connector and install the two (M2x2.5) screws to secure it to the
system board.
Next steps
1. Install the base cover.
2. Install the SIM card.
3. Follow the procedure in After working inside your computer.
Speakers
Removing the left speaker
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the WWAN card.
36
Removing and installing components
To Next Page
Loading...
