5. Remove the screw that secures the hard-drive bracket to the hard drive.
6. Pull the hard-drive bracket out of the hard drive.
7. Remove the hard-drive isolations from the hard drive.
Installing the Hard Drive
1. Install the hard-drive isolations on the hard drive.
2. Attach the hard-drive bracket to the hard drive.
3. Tighten the screw that secures the hard-drive bracket to the hard drive.
4. Slide and insert the hard drive into its slot.
5. Tighten the screws to secure the hard drive to the computer.
6. Install the battery.
7. Follow the procedures in
After Working Inside Your Computer
.
15
To Next Page
Loading...
