Dell Latitude E6330 - Display Assembly Service

f) base cover
g) keyboard trim
h) keyboard
i) bluetooth module
j) palmrest
3. Remove the screws that secure the display-hinge covers to the computer.
4. Remove the display-hinge covers from the computer.
Installing the Display Hinge Covers
1. Tighten the screws to secure the display hinge covers to the computer.
2. Install:
a) palmrest
b) bluetooth module
c) keyboard
d) keyboard trim
e) base cover
f) optical drive
g) hard drive
h) battery
i) ExpressCard
j) SD card
3. Follow the procedures in After Working Inside Your Computer .
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
33