Option Description
SMART (Self Monitoring Analysis and
Reporting Technology) specification. This
option is disabled by default.
• Enable SMART Reporting
USB Configuration Allows you to define the USB configuration.
The options are:
• Enable Boot Support
• Enable External USB Port
Default Setting: Both the options are enabled.
USB PowerShare Allows you to configure the behavior of the
USB PowerShare feature. The option is
disabled by default.
• Enable USB PowerShare
Audio Allows you to enable or disable the integrated
audio controller. The option is enabled by
default.
Keyboard Illumination Allows you to choose the operating mode of
the keyboard illumination feature. The options
are:
• Disabled (Default Setting)
• Level is 25%
• Level is 50%
• Level is 75%
• Level is 100%
Unobtrusive Mode Allows you to set the mode that will turn off all
light and sound emissions from the system.
The option is disabled by default.
Miscellaneous Devices Allows you enable or disable the various on
board devices. The options are:
• Enable Internal Modem
• Enable Microphone
• Enable Camera
• Enable Module Bay
• Enable ExpressCard
• Enable Hard Drive Free Fall Protection
Default Setting: All devices are enabled
You can select if you want to enable or
disable media card. The options are:
• Enable Media Card (Default Setting)
• Disable Media Card
58
To Next Page
Loading...
