26 Drive Bezel
Replacing the Drive Bezel
NOTE: This procedure assumes that you have completed the removal procedure
first.
1
With the computer set upright, align and insert the clamps on the left
edge of the bezel into the bezel clamp slots along the left edge of the front
panel.
2
Slide the latch downward and hold it in place.
3
Rotate the front cover toward the computer until the bezel–grips on the
right edge of the cover snap into place, and then release the latch.
4
Follow the procedure in "After Working on Your Computer" on page 17.
1 bezel 2 bezel latch
1 bezel clamps (3) 2 bezel
3 bezel latch
To Next Page
Loading...
