68 Drives
Replacing or Adding a Floppy Drive or Media Card Reader in the
Desktop Computer
NOTE: This procedure assumes that you have completed the removal procedure
first.
1
If you are installing a new floppy drive or media card reader:
a
Remove the drive panel insert installed in the drive bay.
b
Remove the four shoulder screws from the drive panel insert.
c
Attach the shoulder screws to the new floppy drive or media card
reader.
2
If you are replacing an existing floppy drive or media card reader, remove
the four shoulder screws from the existing drive or media card reader.
3
Insert the four shoulder screws into the sides of the new floppy drive or
media card reader, and tighten them.
To Next Page
Loading...
