I/O Panel 81
6
I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
Removing the I/O Panel
NOTE: Note the routing of all cables as you remove them so that you can reroute
them correctly when reinstalling the I/O panel.
1
Follow the procedure in "Before Working on Your Computer" on page 9.
2
Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19 or "Removing the Desktop Computer Cover" on
page 21).
CAUTION: When sliding the I/O panel out of the computer, be careful to prevent
damage to the cable connectors and the cable routing clips.
3
Disconnect all cables connecting the I/O panel to the system board.
To Next Page
Loading...
