Cards 41
PS/2 Serial-Port Adapter
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: To prevent static damage to components inside your computer,
discharge static electricity from your body before you touch any of your computer’s
electronic components. You can do so by touching an unpainted metal surface on
the computer chassis.
Removing a PS/2 Serial-Port Adapter From a Mini Tower Computer
1
Follow the procedure in "Before Working on Your Computer" on page 9.
2
Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
3
Gently push the release lever on the card retention latch to pivot the latch
open. The latch remains in the open position.
To Next Page
Loading...
